LAVA Iris30 S108 Dead Repair LCD Fix Firmware File Download 100% tested

LAVA Iris30 flash file free download
LAVA Iris30 flash file without password
LAVA Iris30 without password
LAVA Iris30 free download
LAVA Iris30 S108 flash file free download
LAVA Iris30 S108 flash file without password
LAVA Iris30 S108 without password
LAVA Iris30 free download

MT6572__Lava__iris30__iris30__5.1__ALPS.L1.MP6.V1_LAVA6572.WE.L_P58

DEAD PHONE,HANG LOGO,LCD BLANK,CAMERA FIX,MONKEY VIRUS CLEAN DONE FLASH FILE

PASSWORD PROTECTED FILE COST 100TK ONLY

CALL 01631737497

 Reinsert phone battery. 

 Battery must be charged.

 Phone must be off with battery inside. 

 Please insert USB cable now...

 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)

 Phone detected...Please wait

 Sending DA agent, please wait...

 BaseBand CPU :MT6572_S00

 BaseBand CPU Secure Version : FF

 BaseBand CPU Bootloader Version : 01

----------------------------------------------------

 INT RAM: 128 KB SDRAM

 EXT RAM: 512 MB  DRAM

----------------------------------------------------

 EMMC: (29Gb+4096Mb) HYNIX 0x483447326111 

 EMMC FW VERSION: 01:00:00:00:00:00:00:00

 EMMC CID: 90014A48344732 : 000000000000000000

 EMMC UA SIZE: 0xe9000000      

 BOOT STYLE: EMMC BOOT

 FULL LENGTH: 0xe9c00000       [3.652 GB]

 Detecting high speed port, wait......

 If driver not installed, install high speed port driver.

 If not need high speed port, disable it.

 After repeat opperation.

 Detecting high speed port, wait......

 Detected : Miracle DA USB VCOM (Android) (COM19)

 Detected partitions count: 20

 Start dumping flash, this can take up to 1 hour.......

 Start procesing PRELOADER ......

 Start procesing MBR ......

 Reading:  BEGIN: 0x1400000        - LEN: 0x200           

 Start procesing EBR1 ......

 Reading:  BEGIN: 0x1480000        - LEN: 0x200           

 Start procesing PRO_INFO ......

 Reading:  BEGIN: 0x1500000        - LEN: 0x300000        

 Start procesing NVRAM ......

 Reading:  BEGIN: 0x1800000        - LEN: 0x500000        

 Start procesing PROTECT_F ......

 Reading:  BEGIN: 0x1d00000        - LEN: 0xa00000        

 Start procesing PROTECT_S ......

 Reading:  BEGIN: 0x2700000        - LEN: 0xa00000        

 Start procesing UBOOT ......

 Start procesing BOOTIMG ......

 Reading:  BEGIN: 0x3180000        - LEN: 0x600000        

 Start procesing RECOVERY ......

 Reading:  BEGIN: 0x3780000        - LEN: 0x600000        

 Start procesing SEC_RO ......

 Reading:  BEGIN: 0x3d80000        - LEN: 0x40000         

 Start procesing FRP ......

 Reading:  BEGIN: 0x3e40000        - LEN: 0x100000        

 Start procesing LOGO ......

 Start procesing ANDROID ......

 Reading:  BEGIN: 0x4c40000        - LEN: 0x60000000      

 Backup CACHE disabled, we will skip it....

 Backup USRDATA disabled, we will skip it....

 Saved to : C:\Users\Ridoy\Documents\Android_MTK\firmware_backup\0-By CPU_MT6572_EMMC_08_22_2017_18_29_10

 Wait untill phone will start charging.

 All done.

>>>>>>>>>>> How to flash <<<<<<<<<<<
Step 1: Download and extract the stock firmware file.
Step 2: Install the USB Drivers on your pc
Step 3: Open the SP Flash Tool and load the Scatter File
Step 4: Click on firmware Upgrade / Download Button on SP Flash Tool to Begin the Flashing.
Step 5: Connect your Smartphone to the computer using the USB Data cable.
Step 6: Pop up Green Ring will appear at the end of successful Flash.

Important Notes:
Take A Backup Of Your Personal Data Before Flashing Or Installing The Firmware On Your Smartphone. As This Helps You To Recovery The Personal Data Whenever Any Thing Wrong Happens.

• Tweet
• Share
• Share
• Share
• Share